-
Problem: Dimmer modules slide out about 1/2" during transport of the rack. Modules must be re-seated before each use. Solution: Install (2) 7053A3087 Module Retainers per door (i.e. 2 per SP24, 4 per SP48). This will help to hold the modules in place.
-
Manuals Sensor+ CEM+ v3.0.0 User/Configuration Manual Sensor+ CE Installation Manual 5241.Sensor+ CEM+ Configuration Manual v1.0.2 RevA 2004.pdf 4667.Sensor+ CEM+ Configuration Manual v1.2.0 RevA 2005.pdf 8865.Sensor+ CEM+ Configuration Manual v2.0.0 RevA 2006.pdf 3678.Sensor+ CEM+ Configuration Manual...
-
Default IP configuration by product Product IP Address Subnet Mask Gateway IP Unison 10.101.10.101 255.255.0.0 10.101.10.101 Obsession Primary RPU 10.101.30.101 255.255.0.0 10.101.30.101 DMX Node 10.101.0.99 255.255.0.0 0.101.0.99 Default subnet mask and gateway Item Value Subnet Mask 255.255.0.0 Default...
Posted to
ETC Product Wiki
by
Tracy.Fitch
on
05-12-2010
Filed under: CEM+, Congo, CongoJr, DMX, Element, Emphasis, Eos, GCE, Ion, KnowledgeBase, Legacy Unison, Net2, Net3, Obsession, ObsessionII, Sensor+, Unison, WRFU
-
*Menu structure is based on software v2.1.7 *If your rack does not have a configuration in it already, skip to step 6. Scroll to [Login] Enter the password 3,3,3,3 (scroll up to 3 and hit checkmark, etc.) Scroll to [Rack] and hit the checkmark Scroll to [Delete All Racks] and hit the checkmark It will...
-
How much power does the CEM+ Use? 0.25A Peak 0.14A Normal/Idle
-
Note: Basic/Portable mode is a simplified setup mode in CEM+ version 2.0 and above, intended for portable/touring racks. In basic/portable mode, the only active DMX is port A input. Once a unit is configured and running in basic/portable mode, anyone can press checkmark from the front panel to quickly...
-
CEM+ SMARTLINK POWER BOARD 2 7150B5620 LED Indicator Guide LED Color Component Location Purpose Default/Normal State Red CR1 Indicates a voltage imbalance on the LON network favoring NET B OFF (May glow slightly) Red CR2 Indicates a voltage imbalance on the LON network favoring NET A OFF (May glow slightly...
-
The ELV10 will fire with CEM+ test mode IF these steps are followed: Insert the dimmer into the rack and turn on the dimmer circuit breakers. Put the CEM+ into test mode. Insert the CEM+ in the rack and/or energize the rack. Basically, if you provide power to the ELV10 before the CEM+, the ELV10 will...
-
When equipment goes bad out in the field, it's often extremely helpful if the owner/end user can keep track of the circumstances of the failure. This is especially true when the problem is intermittent and might not occur when the technician is present. Service Technicians are exceptionally skillful...
Posted to
ETC Product Wiki
by
Kelsey Aleckson
on
08-24-2009
Filed under: AAS, Acclaim, arri, ASTS, AVAB, CEM, CEM+, Congo, CongoJr, cRRFU, DAS, Dimmer, Distribution, DMX, ECMUX, Element, ELTS, Emphasis, Eos, ETCLink, Ethernet, Express, Expression, GCE, Idea, Ion, Irideon, K96, KnowledgeBase, Legacy Unison, LMI, Lon, MDD, MDR, MicroII, MicroVision, MIDI, MPE, NCE, Net2, Net3, Obsession, ObsessionII, Pharos, RDM, Response, RFR, RFU, RRFU, RS-232, RVI, Sensor, Sensor+, SineWave, SmartBar, SmartFade, SmartFadeML, SmartModule, SMPTE, Source Four, Source4, Touchscreen, Unison, Vision, WRFU
-
Users with Internet Explorer 7 will not be able to connect to CEM+ (at least up through CEM+ version 2.1). Solution The difficulty is a component of the JavaScript code only recognizes internet explorer with major versions 5 and 6. When IE7 identifies itself with that number, the JavaScript code exits...